One-Piece Mica Band Heater
One-Piece Mica Band Heaters are designed for small-diameter injection molding machine barrels and short heating zones. Featuring an integral closed-loop structure without a side opening, this heater provides close contact with the barrel surface for efficient heat transfer and stable heating performance.
Unlike split-type mica band heaters, the one-piece design must be installed from the end of the barrel. It is suitable for applications requiring a compact heating unit, close fitting, and a continuous cylindrical structure. EaseWise supports OEM customization of inside diameter, heating width, voltage, wattage, terminal configuration, and optional inner insulation according to equipment requirements.
Explore our complete Mica Band Heater range or visit our Band Heater Solutions page for additional industrial heating options.

One-Piece Mica Band Heater Features
- Integral one-piece closed-loop construction with no side opening
- Close contact with the barrel surface for efficient heat transfer
- Designed for small-diameter barrels and short heating zones
- High-temperature mica sheet insulation
- Stainless steel 304 outer sheath; brass sheath optional
- Maximum working temperature of 420–450°C, subject to configuration and operating conditions
- Standard power density of 1.5–2.2 W/cm²
- Optional inner insulation layer for improved thermal efficiency
- Screw terminals, stainless steel braided leads, or terminal boxes available
- Custom dimensions and electrical specifications for OEM applications
Technical Specifications
| Parameter | Specification |
|---|---|
| Heater Type | One-Piece Mica Band Heater |
| Structure | Integral closed-loop, no side opening |
| Outer Sheath | Stainless Steel 304; brass optional |
| Insulation Material | High-temperature mica sheet |
| Maximum Working Temperature | 420–450°C |
| Voltage Range | 110V–480V, customizable |
| Power Density | 1.5–2.2 W/cm², standard |
| Terminal Options | Screw terminal / Stainless steel braided lead / Terminal box |
| Installation | Slide over from barrel end and secure with clamp band |
| Optional Features | Inner insulation layer; thermocouple hole upon request |
| Main Applications | Small-diameter barrels, short heating zones, injection machine barrel heating |
Available Stock Sizes
Standard one-piece mica band heaters are available in limited reference sizes. Most custom orders are manufactured according to the barrel outside diameter and required heating width.
| Inside Diameter (ID) | Heater Width | Reference Stock Voltage |
|---|---|---|
| 40 mm | 40 mm | 220V |
| 50 mm | 40 mm | 220V |
| 60 mm | 50 mm | 220V |
| 65 mm | 50 mm | 220V |
| 70 mm | 50 mm | 220V |
| 75 mm | 60 mm | 220V |
Common stock voltage: 220V.
Stock and customization notes:
- Stock items follow standard industry power configurations.
- Availability should be confirmed before ordering.
- Sizes outside the reference list require OEM customization.
- Stock heaters do not include thermocouple holes. Thermocouple holes are available upon request.
Installation of One-Piece Mica Band Heaters
The one-piece mica band heater has an integral closed-loop structure without a side opening. Installation requires sliding the heater over the barrel from the barrel end.
After positioning the heater in the required heating zone, secure it with a clamp band to maintain close contact with the barrel surface.
Before ordering, confirm that the heater inside diameter matches the barrel outside diameter. Correct dimensional matching helps improve heat transfer and maintain stable heating performance.
Applications
One-piece mica band heaters are primarily used in compact cylindrical heating applications, including:
- Small-diameter injection molding machine barrels
- Short heating zones in plastic processing equipment
- Plastic injection molding machinery
- Compact cylindrical heating sections
- Other industrial equipment requiring closed-loop barrel heating
Custom One-Piece Mica Band Heater OEM Solutions
EaseWise supports OEM customization of one-piece mica band heaters for different industrial heating requirements. We coordinate manufacturing according to barrel dimensions, electrical specifications, technical drawings, or existing heater samples.
Available customization options include:
- Custom inside diameter according to barrel dimensions
- Custom heater width and overall dimensions
- Custom voltage from 110V to 480V
- Custom wattage and power density
- Stainless steel 304 or optional brass outer sheath
- Screw terminal, braided lead, or terminal box configurations
- Optional inner insulation layer
- Optional thermocouple hole
- OEM production according to drawings or samples
For an accurate quotation, please provide the barrel outside diameter, heating width, voltage, wattage, terminal requirements, and order quantity. Technical drawings or PDF specifications are also welcome.
About EaseWise
Taizhou EaseWise Trading Co., Ltd. is an industrial heating solutions supplier based in Taizhou, Jiangsu, China. Our team has more than 10 years of industry experience and supports OEM customers across more than 30 markets.
With experience serving over 200 OEM customers and an ISO 9001-based supply and quality management system, EaseWise coordinates product sourcing, specification confirmation, and quality requirements with qualified manufacturing partners.
Related Mica Band Heater Products
Compare different mica band heater structures to find the appropriate solution for your equipment:
- Mica Band Heater – Complete product range and selection overview
- Standard Split Mica Band Heater – Split construction for easier installation and replacement
- Nozzle Mica Band Heater – Compact heating solution for injection machine nozzles
Related Mica Band Heater Guides
Request a Quote for One-Piece Mica Band Heaters
Looking for a one-piece mica band heater for your injection molding machine? Contact EaseWise for stock availability, OEM customization, and bulk order quotations.
Send us your barrel outside diameter, heater width, voltage, wattage, terminal requirements, and quantity. You can also provide technical drawings or existing heater samples for specification confirmation.
Request a Quote for a One-Piece Mica Band Heater
Amy – Sales
Email: Amy-Easewise@tzheater.com
WhatsApp: +86 188 8318 8154
Hanna – Sales
Email: Hanna-Easewise@tzheater.com
WhatsApp: +86 173 5163 6811
One-piece mica band heaters for small-diameter barrels and short heating zones. Limited stock reference sizes and OEM customization available from EaseWise.



评价
目前还没有评价